Home > Products > Silo > Flat Bottom Silo

Flat Bottom Silo with Internal Stiffeners and Wind Rings or Wind Brace

This internal stiffened silo project is installed in Mongolia for a Flour Mill.Considering the local climate of strong wind, we make additional design of wind brace inside of silos. The main technical parameters of this silo is below: 1. Model:TCK10015 2. Diameter:10.084m 3. Total height:19.85m...
Product Details:

Flat bottom silo with internal stiffeners and wind rings or wind brace installed for Mongolia customers served for a four mill

 

This internal stiffened silo project is installed in Mongolia for a Flour Mill.

Considering the local climate of strong wind, we make additional design of

wind brace inside of silos.

 

The main technical parameters of this silo is below:

 

1. Model:TCK10015

2. Diameter:10.084m

3. Total height:19.85m (not include the foundation height)

4. Silo body height:16.87m

5. Volume:1424m3

6. Size of sheet:1175×2960mm

7. Size of corrugation:W=80mm,D=14mm 

8. Bolt grade:8.8grade (the surface is galvanized)

9. The thickness of roof plate:0.8mm

10. There are 11 pieces of steel plates for each ring, they are 15 rings in total.

11. There are 33 pieces of interior vertical stiffeners and the spacing is 0.96m.

12. The roof and body sheet are made of hot galvanized steel sheets in good quality.   Other parts are painted after processing.

 

Application: Boda galvanized corruaged steel silo series are widely used in various industrial lines such as grain depot, farm, wooden pellets, sawdust, plastic pellet, seed, flour, starch, oil, feed, water storage, alcohol, wine, port, chemistry and so on, which are the very equipments for storage of granular and powder materials.

 

Basic Characteristics of silos:

Performance: Shockproof, Fireproof, Pest Control, Airtight, Ventilation, Moisture proof, Customized

Type: Assembly or Bolted

Material: Galvanized Steel

Zinc coated thickness: 275-450g/m2

Capacity: As required

Using Life: at least 25years according to GB50322-2011 standard

Trademark: BODA

Specification: customized

HS Code: 730900000

Construction Conditions: Prefabricated

Shape: Hopper Bottom Silos or Flat Bottom Silos

Usage: Storage, mainly used for grain or other granular material's storage

Maintenance: Easy

Certificate: ISO, CE, Australia standard, customized

Transport Package: Standard Export Container

Origin: Zibo, Shandong, China

Could be movable: Yes

Easy maintenance: low cost


New design innovation:


New

Old

 

 

Silo

Roof degree

30

25

More storage volume

Less storage volume

 

Roof sheet

One complete piece, corrugated   edge

Be devided into two or three pieces

Better for waterproof and easy   for sealing

Must be pay more attention for connection sealing

Roof natural vents

There’s gooseneck radian

There’s no gooseneck radian

Better for waterproof


Level indicator position

Roof cover plate

1st ring of body sheet

More storage volume

Less storage volume

Width of  body sheet

1.12m

0.88m

Economic material usage

Waste material

Ventilation planks

Be made of galvanized sheet

Be made of steel plate, painted

Safer and cleaner for grain   storage

Paint is easy to be taken off

Spout


Be made of galvanized sheet

Be made of steel plate, painted or galvanized

Elevator


Shaft mounted reducer

hardened reducer

cycloidal pin-wheel reducer

Chain conveyor


Shaft mounted reducer

hardened reducer

cycloidal pin-wheel reducer

image002.jpg

BODA Silos available in Hopper Bottom or Flat Bottom designs

•Hopper Bottom silos in capacities from 10 tonnes to 2,000 tonnes

•Flat Bottom silos in capacities from 50 tonnes to 10,000 tonnes

image004.jpg

•Can be Gas Sealed for fumigation

•Insulation silo, stainless silo and welding silo are all available

•Complete grain storage, aeration, temperature monitoring, level indicating, cleaning, drying, other handling and processing systems available. Elevators and conveyor systems from 10 t/hr to 300 t/hr

image006.jpg

•Full installation service available

image008.jpg

Package:

●bolts, nuts and smaller components are packaged into a pallet

●big and standard components are tightened by steel tape

●other unshaped goods are put into containers in bulk and fixed by steel wire

image010.jpg

Related Products
Feedback: