Home > News > Content
High Quality Assembly Corrugated Soy Meal Steel Silo for exporting
Sep 08, 2017

BODA SOYA MEAL Silo Introduction

  • Silo diameter: 7.334m

  • Roof degree: 30    

  • Bottom degree:70

  • Volume:505m3,    

  • Capaicty(0.6t/m3): 303t;

  • Height of silo body: 7.91m;

  • Total height of silo: 20.50m(not include the foundation height);

  • There are 8pieces of steel plates for each ring, they are 7rings in total,

  • Silo roof include natural vents,guardrail and ladders;Silo body include outside ladders and guardrail.

  • The silo roof and body are made of hot dip galvanized sheet in good quality, 275g/m2 Zinc Coated for silo body, other parts are painted after processing.The steel support legs are made of H beam, lintel girder are made of channel beam, lacing wire are made of angle steel, they are all painted after processing.

  • Size of sheet: 1175mm*2960mm;

  • Size of corrugation: 80mm(width)*14mm(depth)

  • Galvanized bolts and nuts: 8.8grade or 10.9grade, when its necessary

  • Silo design Standard:  Code for design of grain steel silos GB50322-2011

  • Roof peak loading:  900kg

  • Wind speed and Seismic: no special requirement, normal design

  • Trademark: BODA

  • Transport Package:Easy to Export Packing

  • Specification:easy transportation, installation and dismantlemen

  • Origin: Zibo, Shandong, China

  • HS Code:73090000

Container loading for such silos:

Features of Our Silo


1. BODA hopper bottom steel silo series is specially designed by senior engineers in our company, with high-quality galvanizing board.

2. Hopper angles can be 45° and 60°, among which 60° conical bottom is usually used to store larger pellet and powder materials with high viscosity.

3. All BODA silos are precision engineered from high strength, 80mm x 14mm low profile corrugated steel plate, galvanised to 275 g/m2. 

4. Lower basic cost with lightweight, low request for foundation, low consumption of steel.

5. High degree of standardization. We can produce the standard components which can be installed on-the-spot. Simple, easy and efficient to install within a short amount of time due to superior component design which are connected by standard bolts.

6. Easy to maintain. As the parts of the silo are connected by standard bolts, so it is easy to remove or repair it.

7. The life cycle of the silos can come up to 30-50 years long. The products are designed comply with the national standard of GB50322-2001.

Our Services

  •  Pre-Sales Service

  •  Inquiry and consulting support. 

  •  Training how to instal the machine, training how to use the machine. 

  • Engineers available to service machinery overseas.

    Contact Us
    Any problem, freely contact us, Diana is here for your service.
    Tel: +86 15589300619

? Contact Now